Breeze 25A FOC
- Utilizes new vfast observer technology
- low temperature
- high efficiency
- responsive
- low noise
- low interference
- good linearity
- Precise control
- kinetic energy recovery
- Specification: 25A 3~4S
- ￥59
Features
- FOC drive, efficient algorithm, good adaptability, high force efficiency, low noise, better throttle linearity.
- Lightweight design, easy to use, stable and reliable, good speed regulation performance.
- Multiple protections: low voltage protection, high voltage protection, start-up protection, blocking protection, over-temperature protection, over-current protection, overload protection, runaway protection, battery protection.
- Serial control and output (customizable).
protective function
- Low-voltage protection: Motor start-up is prohibited when the power supply voltage is lower than the permissible value.
- High voltage protection: prohibit the motor from starting when the power supply voltage exceeds the allowable value.
- Startup protection: If the startup is unsuccessful, the startup current will be limited, and the startup will be restarted automatically.
- Stall protection: If a stall occurs during normal operation (usually caused by external force), try to restart (note that the stall may damage the ESC when the throtor is high).
- Over-temperature protection: When the temperature exceeds 120°C, the maximum output power will be reduced slowly, up to 40% of the full throttle power, and the original power will be restored after the temperature is reduced.
- Over-current protection: limit the peak current and do not exceed the limit value.
- Overload Protection: When the motor is recognized to be overloaded, the maximum throttle is limited to protect the powertrain.
- Loss of control protection: Gradually reduce the output power after losing the signal for 500ms, quickly reduce the throttle to less than 40% within 3 seconds, and then slowly reduce the throttle to stop.
- Battery Protection:When the 3S battery voltage drops below 9.6V (4S battery voltage drops below 12.8V), it will slowly limit the output throttle to prevent the battery from over-discharging.
Specification
| FOC Brushless Electronic Governor | operating voltage | Maximum Continuous Operating Current | peak current | Product dimensions (without wires) | Product weight (without plug) | BEC output (cable length 200mm) | Input line length | Output line length |
|---|---|---|---|---|---|---|---|---|
| Breeze 20A FOC | 3~4S | 20A | 25A(3s) | 42.5*18*6.5mm | 10.3g | 5V 2A Switching Buck | 75mm（18AWG） | 70mm（18AWG） |
| Breeze 25A FOC | 3~4S | 25A | 30A(3s) | 42.5*18*6.5mm | 10.3g | 5V 2A Switching Buck | 75mm（18AWG） | 70mm（18AWG） |
| Breeze 30A FOC | 3~4S | 30A | 35A(3s) | 42.5*18*8mm | 20g | 5V 3A Switching Buck | 75mm（16AWG） | 70mm（16AWG） |
| Breeze 40A FOC | 3~4S | 40A | 45A(3s) | 42.5*18*8mm | 20g | 5V 3A Switching Buck | 75mm（16AWG） | 70mm（16AWG） |
| Breeze 45A FOC | 3~4S | 45A | 50A(3s) | 42.5*18*8mm | 20g | 5V 3A Switching Buck | 75mm（16AWG） | 70mm（16AWG） |
FOC drive, also known as vector control, compared with the same power square wave ESC higher efficiency, has a better throttle linearity and low noise characteristics.Breeze (and wind) series use the new vfast observer technology, with algorithms and efficient, good adaptability, compatibility with more than the general FOC technology, its output power and force efficiency than most of the square wave ESC; we provide most of the power configurations We provide most of the power configurations of the F0C configuration file, if there is no suitable configuration file for your power, you can mail the motor and paddle and specify the operating voltage range, we give you free matching. If you have any problem in the process of using, welcome to feedback to us, let us do better.