STONE 80A-MC
- Industrial-grade professional procedures, safe and reliable
- Highly reliable start algorithm, no fear of headwind starting
- The throttle is anti-phase loss and fast throttle response to reduce the risk of crashes
- Highly intelligent, adaptive working parameters
- Secure matching
- Specification: 80A 6~14S
- ￥369
Features
- Multiple protection safety: low voltage protection, high voltage protection, start protection, locked-rotor protection, over-temperature protection, over-current protection, overload protection, runaway protection
- The direction of rotation can be set by software
- High-quality components, reliable performance, low internal resistance, MOS, instantaneous current resistance
- The serial port outputs real-time data such as power supply voltage, motor speed, current, ESC temperature and debugging data.
- Shielding signal lines reduces interference
- Optoelectronic isolation signal input and output interfaces isolate interference
- Waterproof Rating: IP55 / Customizable IP68
- Lightweight design, simple and easy to use, stable and reliable, strong anti-interference ability, good speed regulation performance
- All products have been tested by professional production software and full throttle impact load test
Product Specifications:
| Item | Requirements | Remarks |
|---|---|---|
| Support lithium battery | 6-14S (no start above 65V) | Factory inspection items |
| Continuous operating current | 80A | Specific heat dissipation conditions |
| Instantaneous operating current (less than 3 seconds) | 130A | |
| ESC weight | 112g | ±2g |
| Product dimensions | 90.4*36*18.5mm | ±0.1mm |
| Standby power consumption | ≤10mA@60V | Factory inspection items |
| Operating ambient temperature | -20~+65℃ | |
| Running humidity | 15%~85%RH | |
| Storage temperature | -10~+40℃ | |
| Save humidity | 15%~65%RH | |
| Waterproof rating | IP55 | |
| Throttle travel range | 1000-2000us (default) | Calibrateable |
| Throttle calibration range | Maximum throttle (1.6-2.4ms), Minimum throttle (0.6-1.4ms) | |
| The maximum supported speed | 125,000 rpm (electric speed) | Mechanical speed = electrical speed / number of pole pairs |
| Throttle refresh rate | 50-500Hz (100-400Hz recommended) | PWM low level >0.2ms |
| Start the throttle point | 6.7% | |
| * Throttle response time | 200ms (default, customizable) | Throttle from idle to maximum |
| Temperature protection points | 125℃ | |
| Input signal level | 3.3-5V | |
| BEC output voltage | not |
* Specific heat dissipation conditions (low ambient temperature, blowing air, auxiliary heat dissipation surface, feedback MOS temperature below 125℃), can run continuously 80A, continuous high temperature work will reduce the service life of the ESC, it is recommended to keep the feedback MOS temperature below 105℃ in practical applications.
* Throttle response time: when the ESC receives 10%~100% step throttle, the throttle reaches the maximum value within the specified time, but usually the motor speed lags behind the throttle by 100~150ms.(Performance parameters can be customized according to customer's needs, including but not limited to the protection temperature, response time, etc.)
| Item | Requirements | Remarks |
|---|---|---|
| Power cord specifications | 12AWG | Factory inspection items |
| Power cord length | 150±5mm | Factory inspection items |
| Power cord color | Red (Positive) Black (Negative) | Factory inspection items |
| Output phase line specifications | 14AWG | Factory inspection items |
| Output phase line length | 100±5mm | Factory inspection items |
| Signal Cable Specifications | UL1533-24AWG-Gray | Factory inspection items |
| Signal line length | 540±5mm | Factory inspection items |
| Data Feedback Cable Specifications | PVC Row Cable-30 cores-Black Red White | Factory inspection items |
| Data Feedback Line Length | 80±5mm | Factory inspection items |
| Shell material | Aviation aluminum alloy Surface anodized | Factory inspection items |